Check out some similar questions!
Trane xe80 control board failure replacement
[ 0 Answers ]
I have just replaced my TRANE XE 80 control board and the fan comes on immediately and the LED blinks 5 times. I have checked all the rollout sensors and the fan and blower sensors and they are good. I have jumped all the sensors out at the control board and still get the same result. I have...
New control board old trane
[ 0 Answers ]
Just put on new conversion control board on trane 80. Led lights up but nothing happens. Jumped thermostat and inducer and blower comes on but light blinks 4 times( open temp limit circuit). Have my family in house n its turning cold. Worked on many units install not tech. Need help.
Trane control board fuse blowing
[ 6 Answers ]
Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...
Replacing Control Board on Trane Unit
[ 17 Answers ]
Hello, Does anybody have any experience replacing the control board (CNT 03798) on a trane unit? I had an HVAC guy check out the unit, and he told me that was the part that needed replacing. I'd like to do it myself to save several $100.00 on the job, but I've never done it before. It...
Diagnosis of control board in Trane unit
[ 10 Answers ]
Hi there... This is my first question and I would appreciate your expert help: The circuit breaker for my Trane central air unit tripped and upon further investigation, I found some sort of short circuit behind the Integrated Furnace control board CNT 2789. I saw a big spark behind the board... View more questions Search
Add your answer here.
|