Bryant 90 plus furnace 350 mav bu code 12 runs intermittenly

clayton1990 Posts: 1, Reputation: 1

New Member

Dec 6, 2012, 02:40 PM

Bryant 90 plus furnace 350 mav bu code 12 runs intermittenly

No problems other than motor continues to run then shut off and turns right back on what and how to fix please any help highly appreciatted

Check out some similar questions!

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

Bryant plus 90 furnace only runs when fan postiion is set to on and smells like smoke [ 0 Answers ]

Bryant plus 90 furnace, only runs heat when fan postiion is set to on and smells like smoke coming out of the vents. The furnace bod heats up to an exterior temp of 120 degrees, the inverter fan runs and the blower fan runs without any noises. You can feel air blow out of the vents closest to the...

Bryant Plus 80 Code 33 any ideas? Blower runs all time! [ 2 Answers ]

I have a Bryant Plus 80model 395cav048135 that runs for about 10 minutes (blows heat etc) then flames shut off but fan runs continusly till reignites and heats again. (aprox 10-15 minutes) have tried researching this am but no definte answers any ideas?:)

Bryant gas furnace runs blows no heat [ 1 Answers ]

Furnace is running, but no heat is blowing into our house. It smells like a candle that has just been put out. The vent pipe that goes to the chimney is hot to the touch. What do I need to do?

Bryant gas furnace runs blows no heat [ 1 Answers ]

Furnace is running, but no heat is blowing into our house. It smells like a candle that has just been put out. The vent pipe that goes to the chimney is hot to the touch. What do I need to do? Ok, this started this morning. It seemed cold in the house, turned up the furnace and it didn't make...

View more questions Search

Check out some similar questions!

Add your answer here.