 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas Coil Valves for SE-SG1000 Maytag Stackable dryer
I am having difficulty reaching the screws of the piece that holds the gas coil valves in place. Any suggestions? I have used an offset screwdriver and still having problems. The screw closest to the front is very tight and not seeming to release and I can't reach the one in the back. I have the coils unplugged but I can't get them out of the area to switch them out. Help PLEASE!!
|
||||
Check out some similar questions!
:confused:I have a maytag stackable washer and dryer, my first question is how can I use the washer without connecting the hot water hose? I tried just connecting the cold water hose without connecting the hot water, this will not start the washer,
I have a maytag model lse1000 stackable washer dryer. When I first start the wash the water fills up normally but when it goes to rinse it trickles in and also when I want to wash on cold the water trickles in. I have checked the hose and there is not blockage.. Help!!
Maytag DG410 igniter lights then gas comes on but won't stay on , Replaced coil set but wires were not the same colors , so I matched the coils as they came out of the old coils ! The one coil clicks but no gas lights I know I have gas at the valve IT lit once before I changed the coils I may not...
Stackable Washer, Dryer, Maytag Model LSE7806ACE The timer on the dryer does not advance to the cool down program and will run for ever In what every drying cycle that is selected.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
