Ask Experts Questions for FREE Help !
Ask
    pm rentals's Avatar
    pm rentals Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 30, 2012, 07:48 PM
    Armstrong furnace
    I have a armstrong sx80 furnace its not running right.inducer starts up then pilot lights then burners come on for 3 minutes they go out inducer is still running then it stops running and blower stays on.then it repeats the same process till it finally reaches the setting on stat.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Dec 1, 2012, 07:15 PM
    The furnace could be overheating. Air filter clean? No ducts blocked or registers shut?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Armstrong ultra xl 80 furnace [ 0 Answers ]

My furnace will not automatically turn on and off. It will not kick on automatically or cut off automatically. What is the problem?

Armstrong furnace troubleshooting? [ 3 Answers ]

I have an Armstrong Model UHPA090AE1 hanging unit in garage. The unit has a spark ignition and the unit fire the flame last for 25-30 seconds than goes out and re ignites. I checked the High limit its good and the flame sensor looks brand new and was replaced last year. I did clean the flame sensor...

Armstrong furnace sx80 [ 1 Answers ]

The small circulator fan on the front of my furnace will not shut off

Armstrong air ultra sx 80e furnace [ 0 Answers ]

The flashing light says "limit switch open". I have cleaned the filters but the light still flashes 4 times. What do I do now?

Armstrong air ultra sx 80 furnace [ 7 Answers ]

I have an Armstrong Air Ultra sx 80 model# GUJ075D10-2B. The furnace has satisfied the call for heat and everything has shut off and waiting for the next call. The problem is on the start-up. When the igniter starts the flame, it is like there is a small build up of gas in the heat exchanger and...


View more questions Search