 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Beckett GeniSys 7505 flashing red
My boiler turned off and when I went to check my Beckett GeniSys 7505 was flashing red. I've pushed the button to get the boiler running but so far it's happened at least 3 times in the last week.
Should I call to get it serviced or is there something I can do besides pushing the button to get the boiler to start? I should say that I'm not very handy with that sort of thing so any advice is welcome... |
||||
Check out some similar questions!
Beckett AFG Burner now has Honeywell R8184G Primary Control. I would like to upgrade to the new Beckett Genisys 7505 Control. Has anyone done this upgrade? Any advice?
Burner is emitting black carbon smoke why?
The Beckett AFG caused some trouble this year when my grandchildren accidentally turned off the EMERGENCY OIL Burner switch at the top of the stair case.. For some reason it caused water to spray out flooding the floor. I'd like to know how this could be prevented? I was told by the repair man the...
I have an oil furnace... recently, I had a contractor come out to take a look at it. The furnace is tied into my central air conditioning system and the contractor told me that I had a blown computer box on the base of the unit and that it would need to be replaced (for $290 not including labor)....
I recently switched from oil to gas in the house, and rather then get rid of the oil system, I decided to install in the garage. The system used to be a 2 line feed but have only one to it now the other being closed. The furnace will fire up, however fuel is spraying out from the inside near the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
