[pboudre]

My Maytag Preforma dryer was running and then suddenly it stopped never to start again.
I think it might be the thermal fuse but I can't seem to figure out how to get to it. I took the front of the dryer off, but I couldn't see anything. I can't figure out how to get the back off because it is all one piece. It wraps around from the back to front and is all one piece. Do you have any ideas. Thanks

[Lowtax4eva]

Check your breaker panel / fuse box as it may have blown a fuse there. I quickly checked on their website, it doent mention anything about an internal fuse.

Troubleshooting Dryers - General

[sjethro00]

My Maytag Preforma dryer was running and then suddenly it stopped never to start again.
I think it might be the thermal fuse but i can't seem to figure out how to get to it. I took the front of the dryer off, but i couldn't see anything. I can't figure out how to get the back off because it is all one piece. It wraps around from the back to front and is all one piece. Do you have any ideas. Thanks

If it is the Thermal Fuse, The part is fairly cheap, and is really easy to remove and replace. (If You Could) Remove the Casing, and follow the power cord, there should be a small white plastic piece that's screwed to the dryer, where at least 2 cords hook up to it. Not knowing exact model, I looked on Maytag parts and saw a Thermal Fuse for less then $4

Seeing as you're having difficulty removing the casing, you could contact the company and see if they can help you by telling you how to remove the casing. If it's a fairly newer dryer, they may help you, but they might not and might refer you to a service tech (some service techs may also help you, if they know you'll buy a part from them, they won't frown upon a DIY'er)

I would recommend looking here, you can get a rough estimate of parts prices, should you pursue getting a service tech to come out. Brands of Dryer Parts at PartSelect