Ask Experts Questions for FREE Help !
Ask
    gr8rian's Avatar
    gr8rian Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 27, 2012, 08:47 AM
    Temp star sp 80 will not ignite. Nothing I've read works.
    Temp star sp 80 First fan starts and nothing else happens. I have read through a lot of these ask sites and non of the trouble shooting ideas help.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Nov 27, 2012, 10:25 AM
    Sounds like the igniter might be bad
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Nov 27, 2012, 05:54 PM
    Lots of option here. Can you let me know exactly what is happening at the furnace when there is a call for heat? You will need to watch closely at the pilot area for spark and or any lighting of flame at all.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Temp star ca5530 vkd2 [ 1 Answers ]

How many tons

C my coleman presidential II blower works but no heat unless set at a high temp [ 0 Answers ]

With thermostat set at 65 the blower will start without any heat then blower shuts off after 1 minute. After 15 minutes repeats the same procedure. But if I set the thermostat at 75 plus the heaterthe blower will start and after a minute or two warm air will be delivered. Could this be the lower...

How do I know if the stove regulator temp works [ 0 Answers ]

How do I replace the part that control the temperature on the top elements on the stove?

How do I know if the stove regulator temp works [ 0 Answers ]

I am trying to replace the control that regulates the top elements. There are number on the parts which ones do I need to buy a replacement. There is also signs of overheating on the piece. And also I have notice sparks when you increase the settings

Carrier furnace does not ignite but fan works [ 3 Answers ]

My carrier funace will not turn on. The fan works when you put "fan on" butnormally it doesn't. The igniter does not seen to get hot or anything. We have an automatic ignitinion system and when we push some plastic thing with five wires on it and six holes under but olny five have metal holes into...

View more questions Search