 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi folks, I have a Dayton mod. 5K960C 1hp,1ph 115/208-230v electric motor and am mi
Im missing the diagram in the cover plate and want to install in 115v mode , anyone have that cover plate or know this motor that can tell me where to connect each wire? David
|
||||
Check out some similar questions!
Hi, I need some help hooking up a drum switch to reversible 110v dayton mod 5K340L cap start ,1/2 hp motor. I have six leads T1 T3 T8 T2 T4 T5. The switch is a Dayton 2X441 clone. Wiring diag on motoe is a bit hard to make out and I don't want to smoke anything. Thanks!!
I have a RBHC Rheem A/C, let me know if I can use a dayton motor for the fan?
How can I power a 550w 230v electric cable hoist from a pick-up truck. I have a ford pick-up truck and I baught an electric cable hoist, it is 230c 550w and comes with a 3pin plug attatched so I can be easily plugged into a socket outlet for use, I want to use it so that it is mounted to the back...
I inherited a 1972 Unisaw 3hp 3Phase motor. I have a 30 amp breaker going to my detached garage with a sub panel of 4 15amp breakers. The VFD to run the saw has an input of 230V single phase 28.5amps (I am not sure if this is the correct amount of amps, seems kind of high) and an output of 230V...
Can I run a 15/230v motor from a table saw on 15amp breaker in a garage? It trips the breaker anytime I plug it in to any outlet in my garage. If not, what should I do or how would I be able to do it? Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
