Ask Experts Questions for FREE Help !
Ask
    rascal48's Avatar
    rascal48 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 26, 2012, 05:30 PM
    Noma Programmable Timer
    I have an old Noma timer N1454 and can't remember how to set it. Does anyone have a manual. I can set the start and stop times but don't know how to set the days. Thanks
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Nov 27, 2012, 07:06 AM
    See if this post helps. It is for a different model, but it might just work.

    Good Luck,
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma programmable digital timer [ 0 Answers ]

I recently purchased a NOMA indoor programmable digital timer from Canadian Tire (Max. load 1800 W resistive/600 W tungsten/120V/15A). I want to use it to cycle my dehumidifier for peak/non peak loads. Is it suitable for Honeywell 30 pint dehumidifier (Model HDH-131/115V-60HZ/ with a rated...

Noma timer ET525C how to program and can we use an outdoor timer for indoor? [ 0 Answers ]

We lost the instructions on how to set the outdoor timer. It is not easy to figure this out. Also can we use an outside timer inside for the lights? Thank you Denis Lemay

How do I programme a noma programmable, 7 day timer, modelN1507? [ 1 Answers ]

I have an exterior noma timer, model N1507, 1875 Watts. Controls are: Clock, Mode, Prog. Day, Hour, Min. I do not have the manual and have tried different approaches to set it to switch on at , say 7 p.m. and off at one a.m. All efforts have been unsuccessful.

Noma programmable indoor timer. How to set it for one on off cycle every day? [ 1 Answers ]

Good afternoon, I purchased a Noma indoor programmable digital timer. I do not understand the instructions. I simply want it to turn on and off once on a daily basis. I would like every day to be the same and to run indefinitely. When I tried to program the unit it was coming on every twelve...

View more questions Search