Ask Experts Questions for FREE Help !
Ask
    crincon's Avatar
    crincon Posts: 12, Reputation: 1
    New Member
     
    #1

    Nov 19, 2012, 08:32 PM
    Residential fans
    I have four fans around the swimming pool. Two of them have transmiter and receiver for remote control, so I put the small pins in the same position in the transmiter and receiver but different in one fan to the other, both work good the light and the speed for the fan. The other two fans only have transmiter, so you need to push the off bottom to adjust the frecuncy for 5 secons. One work good but the other interfere with the other three. When I tur on the light all four lights came on, the same whit the fans. What I need to do.

Check out some similar questions!

How to wire ceiling fans with two switches,one for fans and one for lig [ 2 Answers ]

How do wire two ceiling fans with two swihtstches. One switch for lights and one for fans?

Residential zoning [ 1 Answers ]

Hello: Trying to help a friend make an offer on a home zoned "SFR" in Nashville TN - it already has a built-in "mother-in-law" apartment in the lower level with proper egress etc. Anyone have any experience in obtaining the proper permits to allow a single family (non-related to owner) to rent in...

A/c residential [ 4 Answers ]

Last summer when we had the really hot days of 90-100 degree temp outside my a/c system would not cool the house below 80 degrees inside and the unit would run constantly I decided today to check the system I put my guages on the cond. Unit and had a suction pressure of 45 and a discharg pressure...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.