Ask Experts Questions for FREE Help !
Ask
    samday119's Avatar
    samday119 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 13, 2007, 07:24 PM
    Drive belt
    I have a huskee supreme pedal drive graden tractor modal series 808k and the drive belt broke.it looks like its going to be a hard job to put another one on,can you give me any tips on how to do it?
    Sam
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Mar 14, 2007, 07:55 AM
    If you no longer have the manual check under the deck and under the hood for a diagram. Yes most drive belts are difficult to replace because you need to first remove the belts to the blades. In that case, I'd replace both sets since its all apart.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need a Murray Automatic Drive 17 HP 42" Belt Diagram [ 8 Answers ]

I need help bad! I have a 2002 Murray Riding Lawnmower 17 HP 42". I broke a belt and do not know how to put the new one back on. I need a belt diagram for the two belts at the top of the mower, not the deck with the one long belt. The model # 425303x92 I tried to put it back on and no luck. Any...

Lowe's (MTD) 16/42 Drive Belt [ 3 Answers ]

My father gave me Lowe's 1642 riding mower but the drive belt keeps coming off. I have put a new idler pulley on and it still does this. I took the middle cover off and watched the clutch pulley when I was mowing and the belt seems to get too much slack in it and thrown off. Are there any belt...

Polan/weedeater lawnmower drive belt [ 10 Answers ]

Can someone help me figure out how to replace the belt on my poulan/weedeater mower?

Changing drive belt on MTD Yardbug mower [ 0 Answers ]

I have a Mtd Yardbug mower, and need to know how to change the upper drive belt. It appears the belt was laid down, then the mower was built around it.

How do I put a new drive belt on MTD. [ 1 Answers ]

I need to replace the drive belt on my MTD riding mower. I can't remove the pulley attached to the engine to get the belt on. I removed the bolt at the bottom of pulley but the pulley still does not come off. This is a 16 hp. Riding mower with 2 spark plugs, model #1360675H302, serial #...


View more questions Search