Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Removing shower drain for shower pan replacement
 [ 1 Answers ]
 I am in the process of removing an existing shower tray. I am having difficulty in removing the drain. It does not appear to screw in. I have access to from below if I need to cut pvc pipe. This appears to be the only thing keeping my tray in place at this time. 
Installing Basement Shower Drain with Washing Machine Drain
 [ 5 Answers ]
 Hi folks: I would like to install a shower that drains into the same drain as my washing machine. Right now the washing machine drain, 1-1/2" ABS, comes in horizontally about 12" above the concrete floor into a 1-1/2" Tee on a vertical pipe. From this Tee, the vent goes straight up to the... 
Shower weep hole drain turned into tub drain
 [ 1 Answers ]
 I am remodeling my shower to a roman tub. The existing drain is a weep hole drain. Is there a plug for these type of drains? The idea is to use the same drain system and hot mop, tile, etc. around it. 
Rebuilding Shower - Leveling new shower drain?
 [ 5 Answers ]
 Hello, I have come to the postings to get some help as I am a novice plumber. I've gutted my ensuite tilled shower down to the floor. In whacking out the cement pan, and I assumed that I've probably cracked the old drain so when I got to the wood floor I cut away the older PVC 2" piping back... 
Converting cast iron floor drain to shower drain
 [ 3 Answers ]
 
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent... View more questions Search 
  |