Ask Experts Questions for FREE Help !
Ask
    mkdobbs's Avatar
    mkdobbs Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2012, 09:39 AM
    Adapt a 5/8" flare gas supply to standard dryer 1/2" line
    I bought a dryer. It came with a 1/2" OD , 1/2" MIP x 3/8" FIP 48" length line. My home gas line is 1/2" with an elbow that takes a 5/8" flare. How can I adapt it?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Nov 19, 2012, 09:35 AM
    Where the gas line ends, put on a 3/8" ODF flare gas valve with ball-type valve. This will fit the standard 3/8" ODF flexible gas lines sold, or you can go with 1/2" if you want.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Correct washer for metal flanged toilet "water supply line"? [ 6 Answers ]

I am installing a Fluidmaster Fill valve.. I have a metal flanged water supply line. Instructions say to use the existing coupling nut (have to.. Can't get it off anyway) and the existing washer. If this existing washer is a flat washer that sits on top of the flange, there wasn't one when I...

"Form" placed in "Microsoft Access" can be accessed from a "Button" in "VB.Net" App [ 1 Answers ]

Hi All, Actually, I'm not very well in programming but a task is assigned to me related to .Net. Basically, there is a database in Microsoft Access. I have made forms in it which are based on queries to retrieve required results. I have also made graph of it. Now, I have to merge this...

Commercial toilet with 3/4" supply line? [ 9 Answers ]

Hi all, I want to install a wall-mount toilet in my residential bathroom that is currently stripped to studs. To use a Duravit or Caroma, I would need to move the vent stack and studs to allow room for the in-wall tank, so I am exploring using a commercial toilet instead. Toto has a 1.28 gpf...

Changing wiring to use "second line" rather than "first" line on specific jack [ 9 Answers ]

Hi, and thanks! I have two phone lines (telephone numbers) coming into the house. I want to change a particular jack from one line to the other (exclusively for a fax). The current jack has a pair of tan wires going to "black (heavier wire and screw)", a pair of blue wires going to "red", a pair...

Reducing gas dryer line from 1/2" to 3/8" [ 2 Answers ]

:confused: I have an old house! The gas line from the house is 3/8", the line from the dryer is 1/2". Can I not just purchase a reducing coupling to adjust the size??

View more questions Search