Ask Experts Questions for FREE Help !
Ask
    cenyeji's Avatar
    cenyeji Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2012, 08:26 PM
    Tappan guf 80d24 e3 furnace
    How do you turn on a tappan guf 80d24 e3 furnace

Check out some similar questions!

Gas valve size for Tappan furnace [ 0 Answers ]

I have a Tappan forced hot air system model # GUF 105 D E5 It's a 105,000 BTU size. A repair man said the exhaust output was 4000 units and it should be around 100 units. He replaced the gas valve with one he had in his truck and I think it's the wrong size. He adjusted the valve somehow and got...

SJC ( Tappan ) furnace no spark [ 2 Answers ]

I have an 1979 SJC ( Tappan ) intermittent ignition power vent furnace which will not light the pilot. The inducer motor runs when the thermostat calls for heat, and I have 24 V at the R & W terminals on the transformer, but nothing at the gas valve. What should I check? Thanks!

How old is my tappan furnace model GUF-80-0-34-E5 [ 1 Answers ]

It's serial # is 76 A24355

Tappan Furnace Fuses [ 0 Answers ]

I have a Tappan Furnace. I just replaced the circuit board and I am getting no power at all-no lights coming on. I do have cover replaced and I do have power on. Is there a fuse other than the circuit board fuse that might need tobe replaced? If so where do I loacate it? Thanks

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.