Ask Experts Questions for FREE Help !
Ask
    raspudin's Avatar
    raspudin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2012, 06:24 PM
    Ceiling fan lights
    I have a ceiling fan with 4 bulbs. I bulb lights 3 don't. Changed all the bulbs still the same socket lights and the other 3 don't.

    Thanks,
    Mike
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 16, 2012, 06:28 PM
    Probably a wiring issue in the light fixture. Make sure the light connector plug is tight and all wires connected.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why is my ceiling fan lights blinking, when I turn on my lights. [ 2 Answers ]

My ceiling fan lights blink when I turn on my ceiling fan light... It does this when the fan is on or off... I have fluorescent lights the energy kind in my ceiling fan. My fans are 2 yrs old... And they are Harbor Breeze kind..

Ceiling fan lights dim [ 11 Answers ]

When I first turn on my ceiling fan lights (3) using the wall switch, they come on normally and then dim almost immediately. After about 10 minutes when they warm up, if I turn the lights off and on again, they come up to their normal brightness and all is well. We have tried replacing the bulbs...

I have 2 ceiling lights and 1 of them has just gone off [ 1 Answers ]

2 sitting rooms lights 2 switches and last night 1 just went off and 1 stayed on

Ceiling fan lights [ 1 Answers ]

The three lights on the ceiling fan are not working well. One won't stay on, one makes a Pop sound and one is working correctly. Does this mean it needs to be replaced?

Ceiling fan lights too dim [ 4 Answers ]

I have a Hampton Bay Antigua fan with an add-on light kit (4 bulbs). I also purchased the wall mounted remote control. It worked fine up until a few weeks ago. Now, all four bulbs are extremely dim. I've tried higher wattage bulbs but there just doesn't seem to be enough power to light them...

View more questions Search