Ask Experts Questions for FREE Help !
Ask
    deevaldivia's Avatar
    deevaldivia Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2012, 07:11 PM
    Intertherm gas furnace, model mgh 065-awbn 06
    I was red tagged by the gas company on my Intertherm gas furnace and the tag says "leak on pilot button on control box." How do I get this replaced or repaired?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 12, 2012, 07:14 PM
    Probably not worth repairing if you can. You need a new gas control valve. Buy an aftermarket valve but safest way is to have an HVAC company do it. What prompted the inspection, smelling gas?
    deevaldivia's Avatar
    deevaldivia Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Nov 12, 2012, 07:26 PM
    Quote Originally Posted by ma0641 View Post
    Probably not worth repairing if you can. You need a new gas control valve. Buy an aftermarket valve but safest way is to have an HVAC company do it. What prompted the inspection, smelling gas?
    Yes, and I was told it had to be a licensed contractor who installs it. I am getting quotes up to $400, is there any way of me purchasing the product myself
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Nov 12, 2012, 07:45 PM
    Quote Originally Posted by deevaldivia View Post
    Yes, and I was told it had to be a licensed contractor who installs it. I am getting quotes up to $400, is there any way of me purchasing the product myself
    If you know the exact part number of the valve you can check on line to see who sells them BUT I do not recommend you try to install it since it does take special tools to set the proper gas pressure etc. Good luck with your repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm furnace/ac unit model #M1GC070ABW [ 1 Answers ]

Heat part works fine on unit but when we try to access the ac unit it blows #3 fuse blower outside does not kick in. It will try to come on for a few seconds Then it blows fuse

Pilot light on intertherm furnace model g [ 0 Answers ]

Originally posted October 11th 2009 - I have acquired a small mobile home with the same style and model Intertherm furnace. The instructions given were vague... I was wondering if there were more specific instructions for manually lighting this furnace where no provisions exist. I don't see any...

Intertherm furnace manual for model # FEH-012HA-C-03 [ 1 Answers ]

So here's the thing my furnace runs constantly unless I hit the breaker! I had a friend come and look at it because it wasn't kicking off any heat, it would turn on but no heat.now after he rearranging the wires I have heat all the time please help.

Intertherm furnace-model MGHA056AAFC-05 [ 1 Answers ]

Pilot light will not stay lit. how do I fix

Intertherm furnace model # w509809 [ 0 Answers ]

When furnace is in use the fan will come on when the burner is on but when burner goes off the fan will keep coming on and off intertherm furnace model # w 579809

View more questions Search