Day and Night furnace HH12ZA260 limit switch

TinFoil Posts: 1, Reputation: 1

New Member

Nov 12, 2012, 01:33 AM

Day and Night furnace HH12ZA260 limit switch

Hi we have a day and night heater and last year fan would turn on and off 4 or 5 times at end of cycle now fan stays on till we unplug system I think it's the limit switch

Check out some similar questions!

Carrier furnace: limit switch fault furnace has ignition but blower will not come on? [ 2 Answers ]

Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?

I have a Miller furnace that I have replaced limit switch 626337 and aux switch 62639 [ 0 Answers ]

Blower will not come on when furnace comes up to temp but can turn blower on with switch in fan setting.

Furnace Limit Switch [ 15 Answers ]

I've raised this issue in other forums. I have a high efficiency furnace that has worked flawlessly for the last four years (the house was built in 2000). This year we had to have the circuit board replaced. After that there was a problem with the blower, i.e. it wasn't shutting down after the...

Furnace fan hi limit switch [ 1 Answers ]

I have a Trane XV80 two stage furnace. While on vacation the house sitter called and reported that the house temp had fallen to 34-degrees. He told me that the thermostat would not allow him to set a temp above 32-degrees. The thermostat is a White-Rogers 1F80-51 programmable Electronic Digital...

Limit switch on gas furnace [ 1 Answers ]

Fraser johnson intermittingly kicking high limit switch,code flashes 4 times on board,it never has any other codes,replaced limit switch,still same problem

View more questions Search

Check out some similar questions!

Add your answer here.