 |
|
|
 |
New Member
|
|
Nov 10, 2012, 11:12 AM
|
|
Amps
My basement is divided into 2 sections, with each section having its own CB of 20 amps. I currently building a studio apt, which utilize both sections of the basement. I'm using each amps (sections) to power lighting & outlets.
One side, I have: 8 outlets & 1 light fixture.
Other side, I have: 5 Outlets & 3 lights.
My concern or question is: Am I safe with the utilization of each amps for both sections.
Thanks
Henry
|
|
 |
Uber Member
|
|
Nov 11, 2012, 04:48 AM
|
|
How many circuits for a space depends on the square footage of that space. Beginning with 3 watts per square foot for general lighting. There may be other required circuits/ loads also.
So, cannot tell you if those two circuits are sufficient until we know the sq ft. of livable space.
|
|
 |
New Member
|
|
Nov 11, 2012, 08:47 AM
|
|
First, thank you for helping me.
The studio is: 24' X 17' = 408 sq ft.
The reason for so many Outlets, is because of convenience and not because they all will be utilize at the same time. Don't like extension cords (too messy).
For the record, I also have 2 more breaker covering the rest of the basement. All 4 amps were already in place (Main Panel) when I bought the house 17 yrs ago.
The studio will have a kitchenette: Sml Frige (office size) / Micro / Toaster Oven). The bathroom will be on another breaker, which I will be adding to the main bx.
Thx
|
|
 |
Uber Member
|
|
Nov 12, 2012, 03:51 AM
|
|
Seems this space is well covered by ample circuits. The circuits you propose is fine.
|
|
 |
New Member
|
|
Nov 12, 2012, 05:46 AM
|
|
I think so too, but needed to get someone else opinion!
Thanks
|
|
 |
Ultra Member
|
|
Nov 12, 2012, 08:25 AM
|
|
vandido...
Is this apartment for your private use or will you be renting
To the public?
If public, you should have a conversation with your building official
Electrical subcode. I smell fire walls and separations...
|
|
 |
New Member
|
|
Nov 12, 2012, 11:51 AM
|
|
It's for personal used.
I don't like renting!
Thx
|
|
 |
Ultra Member
|
|
Nov 12, 2012, 12:10 PM
|
|
In that case you're good to go!
|
|
 |
New Member
|
|
Nov 12, 2012, 02:27 PM
|
|
Like I said before those 20 amps breakers were there before I bought the house (active), but now that I'm sectioning the space into 2 sections, I figured a second opinion wouldn't hurt and be safe.
Thank You again
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Cost to upgrade from 100 amps to 200 amps and ground
[ 4 Answers ]
StanFortyMan has made a lot of sense about my needs in a home with a 100 AMP Service.. I would like to upgrade to 200 amps.. with some ground sockets(or whatever this is called) and put in more sockets... The house is 1300 square feet... does anyone have a guestimate of costs??
Thanks,
Annie
100 household amps vs 200 amps
[ 6 Answers ]
I am living in an "old" house with 100 amps coming in. I am in the process of doing reconstruction and would like to know if I run all new wires and outlets and get rid of dusty broken wires and connection boxes left open to rot---Can I use the same fuses and wiring for 100 as for 200 or do I...
Changing from 100 amps to 200 amps
[ 1 Answers ]
I have a gas water heater (40 gallon tank). I want to change it to an electric tankless water heater. I have read that I need 200 amps in the house to do this, but currently I have only 100 amps. The outside meter is located only about 25 feet away, but the lines are underground. What is...
View more questions
Search
|