Ask Experts Questions for FREE Help !
Ask
    sparksmike's Avatar
    sparksmike Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2012, 07:47 PM
    Replaced circuit board. Old gas heat unit has a honeywell s86h on it can't get pilot.
    Can't getpilot to lite

Check out some similar questions!

Bad circuit board ST9103A 1069 replaced it now only fan runs [ 1 Answers ]

I have a oil master heater. The circuit board is a ST9103A-1069. The far right relay burned out, so I found a new Board on eBay. I installed it and now the blower comes on,and won't shut off,but the burner will not. It's a becket burner and the green light does not come on. It seems like no power....

No gas replaced circuit board St9120c w/ St9120u Now gas shuts off when blower starts [ 1 Answers ]

I'm hoping some one can help. I've been without heat for a week. I have a nordyne g3ra096c-16 furnace. The problem was the ignitor would glow but the gas valve wouldn't open. I tried to trouble shot it myself but had to call a technician. He came and said it was the circuit board and would cost...

I have a bryant 397h furnace and the blower will not shut off.replaced circuit board [ 2 Answers ]

I have a bryant 397h furnace and the blower will not turn off.I replaced the control center circuit board and still runs. Any suggestions?

Circuit board for air conditioning unit [ 2 Answers ]

When I turn my t stat to heat it pops my fuse in the circuit bd. The a/c works fine . I looked at the heater elements and they look fine no broken wires.when this happens I see an arc on Or near the board.please help.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.