Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling light wiring-1 dimmer switch and 1 wall switch
[ 2 Answers ]
My new ceiling light has black,white and green wires. My ceiling box has 1 single black,1 copper, 2 white grouped together and 2black and a 1white grouped together. How do I connect my new light with only 3 wires to all the ceiling box wires. I have a dimmer switch on one side of the room and a...
Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan
[ 1 Answers ]
I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...
Trying to wire ceiling fan switch and 2-3way light switches for ceiling lht/fan combo
[ 5 Answers ]
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
2 Ceiling fans on one switch - switch won't turn on or off
[ 5 Answers ]
I am more than boggled regarding our ceiling fan issues. We had an existing ceiling fan with light over our dining room table and have just installed another ceiling fan with light in our accompanying living room. There was never any lighting in our living room before now. We drilled a hole and...
Wiring ceiling fan switch and light switch
[ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and... View more questions Search
|