Ask Experts Questions for FREE Help !
Ask
    simplyaz's Avatar
    simplyaz Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 12, 2007, 03:12 PM
    Replacing Shower Membrane/Cast Iron Drain
    Hello, I am replacing my shower membrane pan with a new one. I have purchased a cast iron drain to replace the old cast iron one, however where ever I read about doing a shower pan they say to replace with PVC drain. Is this something that must be done? Or can I replace it with the same type of drain that was there? How do I seal the drain around the membrane?

    Thanks!
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
     
    #2

    Mar 13, 2007, 10:45 PM
    The flange of the cast iron drain should be intact in the floor, flush with the floor, and reusable. You may choose to use the top parts of the new cast iron shower drain.
    The top flange bolts to the bottom flange and clamps to seal.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing cast iron drain pipe? [ 6 Answers ]

Put in a dishwasher and was working on the drain when I noticed the 2" cast iron drain pipe wasnt in very good shape. I spliced it with a sawzall ans the put pvc in and tried to use a boot on each end but it still leaks. Then from the cutting another joint in it started to leak. Ive decided its...

Replacing Tub drain into cast iron. [ 1 Answers ]

My tub drain is downstream from both the toilet and the roof vent and every time the toilet flushes the tub trap is emptied and I get sewer smells... Photo @ www3.ns.sympatico.ca/dlpotter/Plumbing/ I think I need to add an anti-siphon device between the trap and the cast iron....

Replacing traditional cast iron tub with fiberglass shower unit-HELP [ 1 Answers ]

My wife and I are growing older (Yeah, but I’m probably still older than you!);) and we are considering replacing one of the tubs in our two bath house with a step-in fiberglass shower unit. My wife broke her hip two years ago and she experienced major problems getting in and out of the tubs....

Installing a PVC shower drain to cast iron [ 5 Answers ]

Hi - I was wondering if you could tell me what type of adhesive I would need to attach my PVC drain to the cast iron pipe, below the shower. I have no plumbing experience and am trying to do this myself to save some $. Thanks! :) OJ Bean

Converting cast iron floor drain to shower drain [ 3 Answers ]

I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent...


View more questions Search