 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermal protection on a GE Spacemaker XL Micrwave Oven
I have a GE Spacemaker Xl Microwave Oven, Model # JVM1650WH05, SN SH900500B. Never been used to this point... it is installed in a house that is still under construction. We had a power surge, owing to some creative electrical work at the service entrance. Since then, this microwave oven shows no signs of life. I am wondering if there is a fuse to check, a reset button to push, etc. Or is this thing likely to be deceased.
Thanks, Bryce |
||||
Check out some similar questions!
Where can I purchase the thermal protection device in the East Bay Area (pleasanton, CA 94566)?
My furnace is a Trane with a White-Rodgers 50A55-480 control module. I have been tinkering with it for over 6 months now. I have replaced the ignitor unit and also steelwooled the other unit on the other side. I used to be able to move all the wiring left and this would allow the furnace to...
Getting 4 blinking lights. Furnace lights kicks on and works for like 5 minutes then shuts off but the fan keeps blowing then it repeats over and over again.
I have an American Standard Freedom 80. The blower turns on when heat is called for but as the glow plug is not "lit", no gas comes through and there is no ignition = NO HEAT. I am very ignorant to the workings of furnaces and need some advice. Do I simply try to replace the glow plug? How can...
Hi, I have a 30 year old magic chef 2 ton unit.the condenser fan failed and I replaced it and capacitor. The unit now works fine except that I have had to bypass a limit switch(l 118-15). This switch has 3 wires coming from it and looks like a defrost thermostat. No model number,no schematic....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
