 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No well water after power outage
My power went out and now that its back the well water won't run. I pressurized the bladder to 38 psi and made sure there's power on both sides of the pressure switch. Pressure valve reads 4 psi. Also sanded the points a tiny bit. Any thoughts? Thank you!
|
||||
Check out some similar questions!
I have a 32gal water pressure tank with a 1hp well pump. I want to have more water available in a power outage. Can I put another higher volume water pressue tank in series with the original one or is there a better way?
We live in Mobile Home with a Rheem water heater. We also have a well tank on the property. We recently lost power for the first time. (It was out for two hours from 6 a.m.) My husband went to take his shower within minutes of losing power. It takes several minutes for the hot water to reach the...
Power outage... Due to a power outage, only one paramedic responded to the call. The house was very dark so the paramedic asked Kathleen, a three (3) year old girl to hold a flashlight high over her mommy so he could see while he helped deliver the baby. Very diligently, Kathleen did as she was...
The upstairs of my house consists of two rooms that are powered by two 20 amp breakers which are tied together. A few days ago one of the rooms lost all power while the other room continues to work fine. The power is still out and I have reset the breaker several times and this doesn't work. ...
After coming back from a family trip, we found that there had been a power outage. Several breakers were off position and some electronics (especially telephone) are completely dead. Now, after resetting the breakers, all the power problems are OK except AC. The control panel of AC seems...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
