 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hello, I have a furnace that short cycles.I believe the problem ls with fluctuating natural gas pressures or tempratures that are feeding to my furnace and PILOT system from the local utility company. Before starting the furnace the pilot is fine.The flame from the pilot splits in 2 flames.One...
Hi guys, I have a forced air Tempstar propane Furnace with a weird problem. It starts pretty normal: The thermostat tells it to turn on and the main blower for the house vents starts up. Shortly later the exhaust blower starts and the burners ignite as normal. Then it gets weird. The...
The induction motor comes on then the heat it's stay's on for two mines then cut off it short cycling all nights. Is this a bad pressue switch ,or abad board
The furnace turns on then in a minute or so turns off again. Heat is coming out, but the on off cycles continue. We thought this might have something to do with the windy conditions outside today. The repairman said it seems to be short cycling but couldn't diagnose without looking at it and...
Hello Again, Thank you for the previous help suggestions. The last suggestion I received mentioned the possibility of a defective limit switch. I replaced the switch but that did not solve the problem. However, I did received a fault LED, "defect or flaw in gas flow". I checked my line,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
