Ask Experts Questions for FREE Help !
Ask
    callumy1997's Avatar
    callumy1997 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 30, 2012, 10:25 AM
    Is my lawnmower timing out?
    I have a briggs and stratton 3.5hp flathead mower engine. It starts but dies after a few seconds. It backfires through the carb and a barely any compression. Do I need to regrind the valves? Please help. Thanks
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Oct 30, 2012, 10:49 AM
    First make sure the woodruf key on the flywheel isn't sheered off.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Oct 30, 2012, 10:59 AM
    Hi,
    Sounds as if you may well have multiple issues involved. The valves definitely sound like they are one of them. Removing them, lapping the valves and seats and setting the valve stem to tappet gap. My favorite gaps are 0.007"(lightly snug) on the intake and 0.010"(moderately snug) on the exhaust. Clean the head and the top of the piston before installing it and a new head gasket. Torque in three stages to 165 in./lb. by starting with the bolt between the valves and jumping across to the opposite side, torquing it, go adjacent to it such that the next jump will be at the corner nearest the exhaust, torquing it, jump and repeat alternately jumping and moving beside. I generally go 55 - 60 in./lb. 110 - 120 in./lb. and the final step to 165 in./lb.
    You do not state the age of the engine though it would be thirty years old or more to still have contact points which do go bad. A partially sheared flywheel key will result in poor performance.
    I would be unsurprised if you did not need a new diaphragm for the fuel system. Proper cleaning and oiling of the air filter, or replacement and oiling, should be considered as a must as well.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I set my timing with a timing light on a 95 Accord? [ 2 Answers ]

How do I set the timing with a timing lite on a 95 accord

Timing [ 1 Answers ]

I need to know the timing for a 98 neon.someone put a new belt and I have spark from the coil pack but it doesn't want to fire.

I changed the timing belt on 92 honda accord put all timing marks where they belong [ 2 Answers ]

I changed the timing belt on my 92 honda accord, put all timing marks where they belong. But the car won't start. It sounds like it wants to start but it does not.

Car timing [ 5 Answers ]

I have a 2000 Cavalier Z24 with the 2.4 liter DOHC engine. Recenty it runs like it has no power at all, have a hard time getting the car past 100km/h. It runs smooth enough but no power. I had the car checked and catalytic converter replaced. Car has a little more power but still gutless. Is it...

View more questions Search