 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
State select water heater, gas won't stay on
My waterheater won't stay on. I finally got the pilot to stay on after several tries. After the piolot light stayed on I then move the knob to the on position, then I adjusted the thermostat to position 1. The burner came on but went off after 1 minute. What else do I need to do to keep burner on? The model # is GS640YBRT, 38 gal capacity, made on 12-06-2004
|
||||
Check out some similar questions!
Power direct vent water heater blower will not shut off. Plenty of hot water. Gas water heater. 75 gallons. State select model pr6 75n rvt. The blower is integral to the unit. I could not find the exact model number on the web site and did not find the problem under the troubbl shooting guide....
I have a state select hot water heater. I am all of a sudden continuously hitting the reset button (in the hot water heater), any idea what is making this happen and can I replace the braker in the hot water heater. I am assuming it isn't the element because the water does get hot, that is until...
I have a State Select Hot Water heater model PR650 NBRT (natural Gas), The pilot is very low and occasionaly goes out. Is there a way to adjust the flame?
How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool. Thank you.:)
I emailed Robershaw who's thermostat is on your water heater, and they said I had to ask you about it, as they design stats for different companies. The stat has hot - very hot on the right side of the dial. Even in the 'hot' setting, the water is too hot. On the left side of the dial are the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
