Ask Experts Questions for FREE Help !
Ask
    eforte's Avatar
    eforte Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2012, 01:12 PM
    Furnace with not light
    Blower kicks on but furnace does not light. I have replaced the thermostat

Check out some similar questions!

Older gas furnace with standing pilot light, new thermocouple Burners will NOT light [ 1 Answers ]

Hello, I am at the end of my rope. I have an older Armstrong Air (Honeywell) standing pilot furnace. The pilot light is a strong blue flame. The thermocouple is about 20 min old. (I just replaced it thinking that was the problem). The thermostat seems to be working properly. When I set it to...

Propane Furnace won't start no pilot light red light flashes 3 times [ 6 Answers ]

My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart

How to light a pilot light furnace on a evcon furnace? [ 1 Answers ]

Where do I find the pilot light on a evcon furnace all I see is a on off switch?

Carrier Furnace, Model: 55DRCO-45CB, how to light pilot light? [ 3 Answers ]

We have a 20 year old CArrier furnace, Series 100, Model 55DRCO-45CB. It is not heating even though the temperature gauge on the wall is on and set to heat, 70 degrees. We checked the fuse. It's fine. We don't see any pilot light--in fact, we don't even know where to look for the pilot...

Can't Find/Light Coleman Direct Vent Forced Air Furnace Pilot Light [ 10 Answers ]

I see what I think is the pilot light in my furnace, with the pilot light gas line on the bottom, and the thermocouple above it. The lines feed into a copper looking box, but I can not see if the back is open or if the pilot light is inside of this box. I can not stand this cold, and I have spent 3...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.