 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Floor furnace old won't light burner
The pilot stays lit and when u signal it from the thermostat on the wall it lights the single burner but the flame is a weak blue flame like it has low gas pressure and won't let it kicking fully and heat the house any ideas would be helpful thanks
|
||||
Check out some similar questions!
Furnace burner won't ignite
[ 0 Answers ]
The plate in my furnace won't Light up only the pilot light is on
My lennox furnace won't light the fan blows the pilot light lights it clicks but won't
[ 0 Answers ]
My furnace will not light pilot light lights, it clicks to start but burners will not ignite fan also works
Empire floor furnace burner will not ignite. Replaced pilot and thermopile.
[ 0 Answers ]
Connected thermostat wires but empire floor furnace burner still won't ignite.
Ward floor heater burner won't light
[ 1 Answers ]
I have a Ward Floor Heater. I had the Gas Company come out to light the pilot. They did so and the burner will not ignite. The gas company employee tried to bypass the thermostat but the burner still did not ignite. What else could be going on here. Is it something I can fix myself or do I need to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
