Ask Experts Questions for FREE Help !
Ask
    kd5csd's Avatar
    kd5csd Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2012, 10:40 PM
    Nordyne Central Heat and air won't light
    I have a Nordyne Central Unit that it won't ligth. This is the first time I turned it on. The only thing I see is a red light blinking on the circuit board. I don't have the manual on this unit so I have no idea what is wrong. Any help with this problem will be appericated.
    kd5csd's Avatar
    kd5csd Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 27, 2012, 02:20 PM
    I found out that is had a ground problem. Found the Manual online looked up the code and it told me I had a power problem. Checked the connections and cleaned them. Turned the power back on an no problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nordyne model# Mss-30E-c2 central air conditioner [ 1 Answers ]

Does anybody know how many BTU's this has?

My Nordyne Heat/AC won't heat and the blower keeps running [ 1 Answers ]

I have a Nordyne Model GR4GA-024k072C gas heater. The Blower runs constantly no matter what thermostat setting and its not producing any heat. When I took off the cover it has a red light flashing. Was wondering how to go about figuring what's wrong. Thanks in advance for any help.

How to light pilot light on Intertherm Nordyne Model# MGH-100-AAWN-05? Made in 1987. [ 0 Answers ]

This furnace worked fine one day, but would not fire the next. Thermostat would click when I turned it up, but furnace would not come on - no sound at all at furnace. Then 5-10 minutes. Later the blower would blow cold air for a few seconds. I am not the original owner of this home, but have...

My central gas heat kicks on but does not light or heat up what is the problem? [ 1 Answers ]

Central gas heat kicks on briefly but their is no flame

Nordyne heat pump high suction in heat [ 1 Answers ]

I have a 2 yr old heat pump.in heat mode at 40 deg outside I have 120 psi on the suction and 160 psi on the disc. 99 deg. At discharge from condenser.first season for heat.sounds like a stuck or leaking reverse valve. Any suggestions. Thanks ps I tried switching from air to heat a few times

View more questions Search