Ask Experts Questions for FREE Help !
Ask
    ra11414231's Avatar
    ra11414231 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 26, 2012, 06:12 AM
    Heil furnace trouble shooting
    The combustion exhaust blower and the forced air fan run as log as the power to the furnace is on even when the thermostat is completely disconected

Check out some similar questions!

Heil heater/ac units trouble shooting [ 0 Answers ]

Heater/AC unit blower motor runs on heat but does not run on AC. Any idea what is wrong?

Concord furnace trouble shooting [ 4 Answers ]

My concord furnace blower works but the burner will not ignite,after a few seconds the blower shuts off.

Trouble shooting furnace [ 3 Answers ]

Hello I have a Altra 90 SX Armstrong furnace that has a cycle problem. The model # is a GUK75D103A with a Heatcraft control board 404030001 Cat. # 70K98 The problem that I'm actually having is that it is going through its cycles OK, except the induced fan keeps running and won't shut off. ...

Furnace Trouble shooting [ 1 Answers ]

I have an Coleman Evcon Furnace. Model #15020A the problem is I replaced the Inducer motor, and The furnace starts like normal but then the flames goes out after about a minute or two. The LED light says the Pressure switch is stuck open but it seems fine. I tried to replace the PC board but can't...

Trouble shooting GMP Furnace [ 1 Answers ]

I have a gmp075-4 gas fired furnace, I just replaced the gas valve and the thing starts up fine but when the burner fires and the hot bar goes out the burner goes out any ideas? Limit switch maybe ?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.