Ask Experts Questions for FREE Help !
Ask
    jpf0815's Avatar
    jpf0815 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2012, 01:48 PM
    Gmpn condensing gas furnace
    Can I use a wifi thermostat with this furnace ? I don't see a terminal c to hook up wire to power up thermostat.. furnace is a GMPN condensing gas furnace .
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Oct 24, 2012, 04:00 PM
    Are you sure there isn't a c terminal on the control board where the rest of the t-stat wires hook? Do you have central a/c? If so, where do the two wires that go to the outside unit hook to? One should go to y on the control board, and the other to c. Can you post a pic of your control board?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have no heat on a GMPN condensing unit. But everything else is working [ 0 Answers ]

I have a GMPN condensing gas furnace and it will not come on in the heat part. The light does not say anything,no blinking at all, it is this on the whole time. Nothing kick on at all when I turn it to heat. The fan works and the air conditioning part works just fine. What do you think it could...

Goodman GMPN 120-5 Gas Furnace [ 1 Answers ]

Goodman GMPN 120-5 Gas Furnace-------------Turn furnace on and exhaust vent motor comes on for milliseconds to begin to turn (only a couple degrees of rotation). I can hear a hum, then, which may not to be coming from motor---not apparent to touch. With a Digital Voltmeter on input (Black to...

What condensing furnace product should I buy? [ 4 Answers ]

I feel I need to replace my natural gas forced air furnace (Lennox G8) now 35 years young with a condensing furnace. I have 2 quotes from 2 contractors at near the same price... an Armstrong model 95 V 95% 2 stage variable fan (apparently owned by Lennox) and a Frigidaire FG 7... I have combed...

Exhaust pipe on Goodman GMPN furnace. [ 1 Answers ]

Hi all. I'm trying to find out if the connection, for the exhausting vent pipe, should be glued where it connects to the drain trap assembly that is connected to the combustion air blower? I have placed a link below, to the manual, so you can see the area in question. Look on page 22 (Drain...

Carrier Condensing Gas furnace Code 23 [ 2 Answers ]

Have a Carrier Gas Furnace Model #58MSA. Has stopped working and code #23 comes up, which the owners manual states have service call. Live in area where service calls are hard to come by and am also a DIY type of person. Any suggestions. Thanks Steve

View more questions Search