 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas furnace turns on and off
New thermostat, furnace turns on (fan) when thermostat set to higher tempurature. Igniters fire up and then a couple minutes later the blower begins to send the flames into two of the 3 gas valves. Then they shut off after 30 sec or so.
What gives? Rheem Criterion II Gas furnace. |
||||
Check out some similar questions!
My 80% goodman furnace is 2 years old. I bought one for myself and my tenant. They do the same thing. They will kick on, but before the blower starts or the igniter lights, it kicks right back off. Once again, it will turn on and almost within 2 seconds, it turns off and will continually...
A couple of months ago in May or June, my furnace started turning its self off then turning back on (when turning on the draft blower motor would make a loud noise). We had a HVAC family friend and inspect. He said to disconnect the draft blower and worry about it when it gets cold again (its now...
Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...
Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...
Furnace turns on and then it ignites then turns off. I checked to see if the thermosat was bad but it wasn't then I checked the pressure swith assuming that was the problem but it still does the same thing. Does anyone know the answer to this problem?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
