Ask Experts Questions for FREE Help !
Ask
    gary59's Avatar
    gary59 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 23, 2012, 01:24 PM
    Used abs cement on central vac pvc pipe. Connections seem strong. Will it last?
    By mistake connected Central vac PVC pipes (none of the pipe's or connectors have PVC stamped on them) using ABS cement. The connections seem strong. Will it last?

    Will the small vibrations that I suspect occur when the central vac is on, break the connections over time?

    Is there a tape that I can apply easily over the joints to ensure they will not introduce air leaks? If so any siggestions on one to use. Or any other ideas on how to ensure it will not cause problems.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 23, 2012, 05:01 PM
    Although they are different materials, you shouldn't have an issue with a vacuum. If it was a pressure system, that's a different story. For possible future reference, all purpose glue works with all plastics.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pipe connections from overhead tank [ 4 Answers ]

HOW is it that one side of the building gets water from the overhead tank for more time than the other with all other parameters equal?

ABS/PVC Pipe Connections [ 7 Answers ]

I am about to do a modest bathroom remodel on a 40 year old house. The existing DWV piping is black plastic ABS pipe. I want to use the white PVC but I read somewhere that you should not join the two different pipe types directly. Is this accurate? If so, what is the easiest method. The only other...

Hot Water Heater pipe connections [ 8 Answers ]

My 18 year old 50-gallon hot water has 5 pipes connected to it: Pipes 1-3 below come out of the cinderblock wall on the "cold" (inlet) side of the hot water heater 1. 3/4" cold water supply pipe (input) with a shutoff valve 2. 1/2" pipe (adjacent to the supply line) that connects to the ...

Pvc pipe connections [ 4 Answers ]

I recently noticed that our family plumber installed the trap in our bathroom (pvc) with pipe dope instead of pvc glue. He said that he noticed problems in using the pvc glue (cracking and leakage) and prefers the seal of pipe dope. Since I have never seen this performed before using pvc (I'm a...

Plastic and Copper pipe connections [ 1 Answers ]

Help... I am trying to replace a kitchen faucet. The copper water supply pipe is connected to a plastic shut-off valve. I want to replace the plastic shut-off valve with a metal valve. The plastic shut-off valve will not come off the copper water supply pipe. How do I get this off? I tried...

View more questions Search