 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem criterion fan motor
Ive got a Rheem Criterion Gas furance and I have this serious vibration coming from it. I've was thinking to replace the fan motor because I'm thinking the motor has been running this long that possible the shaft could be out of straight by now. I've been told the vibration is possible from the fan blades being filled with Dust / Drit and that I should try first to blow it out to see if it corrects the problem..
I tried that, and it helped a little but it's not 100%. The serial no. on the whole unit is CW5D302-F31939864. And the other # RGDG07EAUER.. . 12"WC 11-6 DU 1/2, hp and .50"WC 11-6 DU 1/2hp.. Now can someone suggest what motor might fit this or a possible a solution to the vibration while it's running.. Thank you Drew |
||||
Check out some similar questions!
My friend has just moved into a house that was previously abandoned. His furnace is a Rheem Criterion 2 brand/model. We can't tell where the furnace filter should go or what size it is. Can anyone help me out?
When we go to turn on our fan or AC, the unit will kick on and then it starts to go but then it stops and is making a loud humming noise. The blower is not turning. I have tried to push the blower when it is on, but it goes for just a half a second and stops. Does anyone know what I need to fix...
My Rheem unit tripped off yesterday. I went down to have a look and I noticed a puddle on the floor. Initially, I thought the condensate drain sump pump had died but when I took the panel off to look at the coils for the Rheem I noticed a block of ice on the coils and on the cooling transfer...
I found the part #66847 Inducer motor ($200) for my 1992 Rheem Criterion RGDG... The ball bearings were going bad and HVAC companies want from $500 to $890 to replace it. Is it hard or anything tricky about replacing it yourself? I can order the part and try it myself or order the part and have...
Can someone tell me what part number and where I can get a replacement inducer motor on a Rheem Criterion, circa 1992, model RGDG-150ARJR? Already had someone come out and said ball bearings were going bad and motor should be replaced. They wanted to charge me $400 for the motor alone. I see...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
