 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low Pressure
Newly installed kitchen tap has lost pressure but was fine before that for about 2 months after instalation. They are installed with pvc pipe not copper although there is a connection off the main(3/4") feeding into the house which is copper. ( has a special copper to pvc Tee installed to connect the two)
|
||||
|
||||
|
Have you removed and cleaned out the areator? That's the first suspect. Should simply unscrew. Watch carefully when you take it apart. I've done that and then not be able to remember how it goes back together.
Check this out: How to Unclog a Faucet Aerator For Dummies - YouTube No, I am not suggesting you are a dummy. That's just the name of the video. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 2000 ford exsplorer with a v8 engine. It is the limited model with four wheel drive all of the time. I first noticed that after it rained, at start up the oil pressure gauge does not come up to normal until a few seconds of operation. Now its becoming like every time I start it up it takes...
Low water pressure copper pipe low at all fixtures and faucets. City has checked pressure. They installed new shutoff in streetalso. They checked meter and was OK. I am orignal owner feed from street is 3/4".copper house also. House built in 1972. Problem started 6 months ago. I am at whits...
First I had to replace the breaker for the water pump because the breaker must have went bad because I had no power to the pump. Fixed that and everything worked fine. I had to shutoff the water supply to repair a leak in a pipe. After I repaired the pipe I turned the water back on and got no water...
When I had a smaller pump (shallow well) and small tank my water pressure was great. When I had to replace everything the person installing the system put a bigger pump and a huge pressure tank. It is the size of a 50 gal water heater. I replaced everything. Ever since then my water pressure is...
When the yellow jacket brand gauges are put on a 3 ton Tempstar heat pump what should the correct suction pressure and head pressure be. I suspect it to be overcharged in freon. Because it is freezing the compressor, accumulator tank and all the lines soild ice.
View more questions Search
|
