Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Plumbing questions
[ 1 Answers ]
I've been a do-it-yourself kind of guy for home repairs for over 30 years. Two days a go I replaced a leaky pressure tank. The removal and installation went as expected, but I have an issue I can't figure out. The well pump kicks on much more frequently to keep the tank pressurized than before...
Plumbing questions
[ 0 Answers ]
Overflow from temperature and pressure valve I have replaced the element and thermostat on my geyser but whenever I use the hot water tap water drips from the overflow pipe coming from T & P valve this lasts for 30 to 45mins .I have an 150litre pressure geyser can you help
Plumbing questions
[ 0 Answers ]
I have a triton mixer shower fitted & it has never worked properly. It is on a gravity system and when I hold the shower near the tray the pressure is pretty good but as I lift the shower the hot slows to a trickle. I have cleaned the filters in the head & controller & that's about as far as I can...
Plumbing questions ?
[ 3 Answers ]
We moved into a home with a suited bathroom on one side of the basement wall at floor level and a bathroom on the unfinished side of the basement on the other side of the same wall that has the toilet and sink on a platform about a foot above the cement floor. Why is this and how can the second...
Plumbing questions
[ 2 Answers ]
I own a house that's about 50 years old. Recently, I had a clogged sink and needed a plumber to snake it out. Afterward, I asked him what had caused the clog and he said "nothing - I see a lot of this with the older gavanized pipes." Is that true - that old galvanized pipes "cause" drains to... View more questions Search
|