Ask Experts Questions for FREE Help !
Ask
    reneemh's Avatar
    reneemh Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2012, 01:24 PM
    Furnace
    My furance is running but no heat is blowing out of vents. Help!!
    reneemh's Avatar
    reneemh Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Oct 10, 2012, 01:25 PM
    My furnace is running but no heat are coming out of vents.
    reneemh's Avatar
    reneemh Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 10, 2012, 02:26 PM
    My furance will turn on but there no heat. An there's a little green light I can see threw the furnace window the light does not stay on it blinks. What's going on
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #4

    Oct 10, 2012, 07:06 PM
    Inside the blower door should be a key to the blink code. Sometimes the blink code is on the control itself. These lights usually blink x times, pause, blink x times, pause, etc.
    Before removing the door, count the blinks between pauses. An example would be blink, blink, blink, pause, blink, blink, blink, pause. That would be a '3' or '33' code depending upon the control.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace with 3 blinking lights and furnace has flame roll back [ 7 Answers ]

I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search