Ask Experts Questions for FREE Help !
Ask
    Wolfriver6498's Avatar
    Wolfriver6498 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 9, 2012, 08:20 PM
    Extend a 220v line off a 220v outlet
    I have a dryer 220v outlet and want to extend off that outlet to another 220v outlet for another dryer. These dryers will never be used at the same time.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Oct 10, 2012, 08:42 AM
    That should be easy to do, but it's done best with a junction box with a breaker for each outlet. Trying to tie wires together any other way is inviting problems and a fire hazard.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

220v dryer plug different than 220v wall outlet [ 16 Answers ]

Dryer has 2 flat and 1 round prong, outlet has 3 flat prongs. Is there an adapter for that? Also do they make a 220v extension cord or a two into one adapter for a 220v?

Trying to connect 220v 3phase lathe to 220v dryer outlet. [ 12 Answers ]

I want to connect a 220v 3 phase lathe (2hp Baldor motor 2 pole plug with ground) to a 220v 3 wire dryer wall outlet. The lathe plug has black, white and green wires. The dryer outlet is black, white and red. I want to make an extension cord with 12/3 wire, male dryer plug on one end and female...

Connecting new 220V line & tapping off a 110V outlet. [ 4 Answers ]

I have a 220V outlet on the outside of my garage, originally intended to power 220v compressors, welders, etc. I am installing a well not far from this outlet, which needs 220V and I want to run a line from the outlet (underground) line to the pump. How do I do the connections to the pump and can I...

Can I rig 2 generators (220v bi-phase) to get 220v three fase [ 2 Answers ]

I have two 6000 watt generators that are bi-phase and want to run a 5hp motor that is 220v / 3 phase. Is it possible? How would the wiring go? I'm in Mexico and can't find a rental... well I found varios but no one that can hook up my motor.

220v 50a welder, 220v 30a dryer plug [ 1 Answers ]

I just got an arc welder that is 220v 50a. I thought I could plug it into the 220v receptacle in my garage, not realizing how many different types of 220v plugs and amperages there are. The receptacle in my garage turns out to be a 220v 30a dryer plug. My question is can I just change the...

View more questions Search