Ask Experts Questions for FREE Help !
Ask
    mrhall45's Avatar
    mrhall45 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 9, 2012, 01:51 PM
    Its 90 degrees outside and my furnace kicked on
    I have a two story house with two heating zones. The downstairs is controlled with a digital thermostat and the upstairs is an old mercury turn style thermostat. In the summer I turn the downstairs off and the upstairs one I turn all the way down. This summer it was 90 degrees outside and I came home and could hear the furnace running and the upstairs was almost 100 degrees. I turned the thermostat all the way down and the furnace wouldn't kick off so I had to go down to the basement and turn the power off. Is this a problem with the thermostat since the heat was only on upstairs?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Oct 9, 2012, 05:14 PM
    I would start by replacing the mercury stat with a new stat. Over time the spring in the mercury controlled stats wears out and can cause this problem. They don't even make mercury stats anymore. Start there and if the problem persist, at least you have a good stat to start with. Please let me know how things work out.
    mrhall45's Avatar
    mrhall45 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 9, 2012, 05:28 PM
    Quote Originally Posted by mygirlsdad77 View Post
    I would start by replacing the mercury stat with a new stat. Over time the spring in the mercury controlled stats wears out and can cause this problem. They dont even make mercury stats anymore. Start there and if the problem persist, at least you have a good stat to start with. Please let me know how things work out.
    Since they don't make these anymore, would changing the thermostat to a new digital one cure the problem?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Oct 10, 2012, 04:29 PM
    Sorry, I should have been more clear. By "replacing the mercury stat with a new stat" I indeed meant upgrade the stat to a digital. Either way, its time for the old stat to go, whether it cures the problem or not is yet to be determined. One way to know for sure is to simply unhook the wires from the old stat and see if the problem is solved. If it is, then a new stat should cure all. Make sure when removing wires or installing new stat, that the power is off to the furnace and damper control box so you don't short any wires.

    Oh, one more very important piece of info I will need. Is this a forced air furnace with dampers, or is it hot water heat (boiler) with zone valves?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace runs for 3 hours for 2 degrees [ 1 Answers ]

I have an 1880's home 2600 sf and a new natural gas central heat unit bought 4 years ago. I have approx. 8 inches of blown insulation in the attic - my home is very old and somewhat drafty, but we just deal with it because we love it so! This year in October we noticed a spike in the gas bill,...

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Can pre-set my Furnace to 80 degrees, if so how [ 0 Answers ]

My house is not insulated well, 70 degrees pre-set is just too cold, how do I preset it higher?

Furnace won't go over 60 degrees. [ 1 Answers ]

I am wondering what could be causing my furnace to not go over 60. The thermostat is on 70 but it just keeps running and won't go over 60-62 degrees. Hoping someone can give me a little advice.

65 degrees to test furnace? [ 4 Answers ]

Had a home inspection to sell my house. Home inspector said my furnace isn't lighting properly. I'm unaware of a problem -- things seem to be working fine. Ran into another home inspector who said that to properly test a furnace, outside temp should be lower than 65 and the first inspector should...

View more questions Search