 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tiller tines won't turn.
My craftsman tiller is a front tine tiller. The belt pulleys work but will not turn the gear box to turn the tines. I have taken the tiller apart but I can't get to the gears that turn the tines. Do I have to replace the whole thing?
|
||||
Check out some similar questions!
Craftsman 5 HP Briggs and Stratton tiller front tine model 917298352 I bought it yesterday. It is approx 4 years old and was only used twice. I put some gas in it and it started quickly. Ran fine for about 30 minutes and then started revving up and down and then eventually died. I could...
Ariens st824 tines not turning. I checked belt it seems fine. When engine is started and lever is pressed I definitely smell something burning. We got a good storm up here in northern Michigan. Third use this year but this time I was trying to move heavy drifts that were a tall 2 feet high. ...
I have a Craftsman 5HP tiller with reverse (Model# 917.299450) Searspartsdirect link I got the tiller from someone else and it was purchased in 1981 I believe. So its an old old tiller but it still runs and does the job. I replaced the forward motion v belt. The one I put on broke so I replaced...
I am looking for drive cables, Tines Cable, etc. for this tiller. Green Thumb Dub-L-Tines, Model GT5R-F, Service No. 521781 Made by Lawn Chief MFG Co. Probably willl need a service manual if possible. Please help. Bill
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
