 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a State Select Water Heater, I am assuming the pilot light has gone out as I have not hot water. What process do I do to see if this is indeed the problem before calling in a service man.
Why does my gas wall heater pilot light go out when I turn the valve from 'pilot' to 'on'? The pilot lights and stays lit until I try to turn the valve. It's got a brand new thermocouple.
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
Concord 80 + gas furnace will not ignite burners. Issue: Draft blower turns on but no ignitition of gas burners and main blower does not turn on. Investigation: (1) LED is solid, no flshing (2) Looked inside and saw 4 gas outlets that I think are the pilot lights and they are not lit. (3)...
I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
