 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman furnace gu100
Goodman forced air furnace GU100-3?
Asked Nov 26, 2010, 02:09 PM — The pilot won't stay lit. When it calls for heat, sometimes it will runs its cycle for an hour, 2 hours, sometimes even a few days without going out. But when it does go out, it takes a lot to get it lit again. And sometimes it lights, we turn the heat on, it clicks, & then goes out again. We replaced the thermastat, the thermal couple, the filters & cleaned out all the vents. What is wrong? |
||||
Check out some similar questions!
I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great
The pilot won't stay lit. When it calls for heat, sometimes it will runs its cycle for an hour, 2 hours, sometimes even a few days without going out. But when it does go out, it takes a lot to get it lit again. And sometimes it lights, we turn the heat on, it clicks, & then goes out again. We...
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
I would like more info about Goodman furnaces. I just had a man look at my old furnace and give me a bid of $1,450.00 to take out the old one and install a Goodman 80% and bring the old piping up to code. Thanks... jorjee
My Goodman furnace will light and then go out. This will occur 3 times, then will quit running. The control board blinks 1 time and tells me to Check Gas flow, gas pressure, gas valve, and flame sensor. It seems to have gas going to the valve. Could this be a bad gas valve? Or a bad Flame...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
