Ask Experts Questions for FREE Help !
Ask
    dennis weston's Avatar
    dennis weston Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2012, 09:14 AM
    Pressure switch gets moisture in it
    Pressure switch has been replaced 3 times last winter. Getting moisture in switch what's the problem
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 6, 2012, 09:17 AM
    Weather cap on the flue? Water condensing from flue gasses are running back down? Somehow you are getting water into the area. Humidifier?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Had no water banged on pressure switch started working so changed out switch worked [ 7 Answers ]

Had no water Friday night. Banged on switch sat morning and it starting working for a few minutes. Changed out switch sat. afternoon work until Monday morning. Now now water and the breaker is tripped. When I wired it up I put the two wires coming from pump one red and the other black on the two...

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

Moisture in induction motor tube to switch stops furnace [ 14 Answers ]

I have a RPJ II Comfortmaker natural gas forced air upflow furnace about 14 years old. In the last month the thermostst will call for heat the induction motor will run but the furnace won't light. A repair man came out and found condensation in the rubber tube that runs from the induction motor to...

Deep well, pressure tank/switch not building pressure [ 13 Answers ]

The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...

View more questions Search