Ask Experts Questions for FREE Help !
Ask
    MFTUCSON's Avatar
    MFTUCSON Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2012, 08:49 AM
    I am wondering if parts are still available for a Luxaire model frcs0601cd AC unit.
    I am wondering if parts are still available for a Luxaire model frcs0601cd AC unit.
    The coil unit fins have hail damage and need to be replaced.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 6, 2012, 09:15 AM
    Fins are not practical to replace. You have 2 options, replace the condensing unit or, go to Harbor Freight and look in the automotive section for a fin straightening comb. Allstate was going to pay a guy $125 to straighten my fins, I bought the comb for $5 and pocketed $120. Worked great. You can most likely get one of them at Auto Zone, Advanced or other auto parts suppliers.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Luxaire unit blowing cool air [ 2 Answers ]

My Luxaire runs fine. The compressor comes on. The air handler comes on but the air is only cool. Does this mean I have a leak in the system?

Name of my furnace is LUXAIRE Model No P2UDD16N11401C me know please. [ 3 Answers ]

Name of my furnace is LUXAIRE Model No P2UDD16N11401C about 18 years old. I would like to know if I have a flame sensor in this furnace. Thanks let me know please.

Luxaire Furnace Model #G9F08016UPC13C [ 2 Answers ]

Blower works, filter is clean. Hot Surface Ignitor glows, burners ignite for 15 seconds, then cuts out. This cycle happens for (3) times. Fault code then blinks (7) times. According to book it means one of (3) things: a) low gas pressure (however my other furnace works fine), b) faulty gas...

Luxaire furnace Model# G9T08012UPB13C [ 2 Answers ]

6 years old. Blower runs, ignitor glows, natural gas valve clicks but no flame. Blower remains on ignitor glows & cycles 3 times but never fires. Is it the ignitor (not hot enough) or the control valve? I've got a Simpson meter but don't know what values I'm looking for.I had same problem with a...

Luxaire model bata-f036ad [ 1 Answers ]

I need to find specs on this unit I bought it used and need to know what the BTU ratings are

View more questions Search