Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing a hunter ceiling fan & light control to operate my fan w/light
[ 3 Answers ]
I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...
Dashboard, taillight and parking light/night light
[ 2 Answers ]
Honda Accord 94: My dashboard, taillight and parking light/night light are not coming on. I have changed the fuse what else could be wrong. Note that the headlight which is controlled by the same switch comes on.
Replacing the night light bulb in a ceiling fan
[ 3 Answers ]
I have a Hampton Bay ceiling fan with a night light feature encased in a mission-style top glass. Anyone know how to replace the bulb w/o taking the whole fan down?
Installing a light kit on a ceiling fan where a switch enables both fan and light
[ 2 Answers ]
I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...
Broan Energy Star Fan Fluorescent Light and night Lite - GFI Trips
[ 1 Answers ]
Replaced and existing bathroom fanlight with a new fan/fluorescent light unit. Existing circuit is on GFI breaker. Two switches provide power to unit. Shared neutral from switches to unit. After installing unit fan was fine. Light tripped GFI. Connected circuit to breaker and fan and light were... View more questions Search
|