Timer 220v for 110v

azmanyaacob1 Posts: 1, Reputation: 1

New Member

Sep 30, 2012, 11:19 PM

Timer 220v for 110v

Can I use 220v timer switch for 110v supply?

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Oct 1, 2012, 04:03 AM

Probably not. Depends on the timer you have.

Add your answer here.

Check out some similar questions!

Merging two 110v independent timer sources into one single 110v output [ 11 Answers ]

I have two separate 110v pool equipment timers; #1 is the daily filter timer, #2 is the longer pool heat cycle timer. I want to combine both the timers into a single 110v output to the pump/heater. Goal is to run the pump/heater when #1, AND/OR #2 timers are outputting 110v.

110v timer on 220v hwh line ? [ 1 Answers ]

Will installing a 110v timer on one leg of a 220v line to the hwh work?

110v vs 220v [ 8 Answers ]

I have a 220v line run from my house to an outside spot. The line was originally used for a lake pump which has been removed. I would like to extend that power line to 2 new outside outlets. Both outlets may be used for either 110v or 220v devices. Can I use the already existing 220v line or is...

110v vs 220v [ 2 Answers ]

Hi. I have a cell phone that requires for 220v that I bought from the philippines. Is it okay if I plug the charger to a 110v here in the u.s? Would it damage the cell if charger is plug to110v? Thanks for your help. Marcia

Running a 110v Sw off a 220v pool timer [ 5 Answers ]

Help, I have a Pool timer that is wired 220V for the pool pump. I have a separate 110v wire that was switched from my guest house to turn the pool lights on. There is a short in that wire now, possibly a wire breakage in the cement from shifting? Anyway, I've since unhooked it. My question...