Ask Experts Questions for FREE Help !
Ask
    Jimmie71's Avatar
    Jimmie71 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 10, 2007, 07:30 AM
    Comformaker furnace
    I have a Comfortmaker furnace that is not cycling correctly. Model is NTG3075FBG1. The unit cycles OK until the burner turns on but then immediately turns off, the blower does not start at all. The burner will continuously cycle on and off without turning on the blower. I'm thinking the sensor that "tells" the furnace control to turn on the blower is faulty. Can anyone adivse?

    Regards!
    Jimmie
    juggallojed's Avatar
    juggallojed Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Mar 10, 2007, 09:11 PM
    Quote Originally Posted by Jimmie71
    I have a Comfortmaker furnace that is not cycling correctly. Model is NTG3075FBG1. The unit cycles ok until the burner turns on but then immediately turns off, the blower does not start at all. The burner will continously cycle on and off without turning on the blower. I'm thinking the sensor that "tells" the furnace control to turn on the blower is faulty. Can anyone adivse?

    Regards!
    Jimmie

    https://www.askmehelpdesk.com/heatin...ons-58313.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Furnace [ 1 Answers ]

We installed a frigidaire heating and cooling furnace about 2 yrs. Ago and I am finding a carbon residue on the baseboards. Is it faulty? Is it a health problem?

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search