 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Free answers to plumbing problems
I recently fitted a gas meter box in the side of my house prior to asking for a gas supply and meter. The fitting instructions suggested that the mortarwork should keep the box in place but there is a lip which hinders the mortaring process and now that it is dry I find that it still moves in and out. Is it permissible to drill a hole in either side of the box so that it can be secured to the brickwork?
|
||||
Check out some similar questions!
How long do ihave to turn a curb stop cap before it comes off? I've been spinning it for a long tims with othing happening
Hi, The circulator pump has gone bad on my central heating. Unfortunately, I do no have isolation valves installed below the circulator pump. I do have a valve above the pump on the supply line and a valve on the return line. Would it be OK to shot these valves and replace the pump without...
My heating will only come on if I have water on as well!Is this costing me more money?
My washing machine is not draining! It completes the rinse cycle (in which the clothes are being sloshed around and washed) but right before the spin cycle, the machine does not drain. What do I do?
I have an 800’ well with a non pressurized tank and a 1 horse jet pump the tank is full to the top and the air control valve seams to be working there is no blockage in the 1/8” lines on the pressure switch or the air control valve. But the pump starts as soon as the water is turned on and runs a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
