Ask Experts Questions for FREE Help !
Ask
    lvonkolen's Avatar
    lvonkolen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2012, 09:14 PM
    How do I connect the wires from my ceiling fan to the new two wire light switch ?
    This guy said I need to cut it, strip it, and connect it? But where to cut, how to strip and connect?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Sep 26, 2012, 02:07 AM
    From your question it would be advisable to get an electrician to come in and do the job.

    Electric is dangerous if you don't know want you are doing and hurt or even kill u.

    DO NOT TRY TO DO THIS YOURSELF.

    Chuck
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Sep 26, 2012, 11:27 AM
    creahands is right. You are asking this question as if we are standing there seeing what you are talking about.

    If you describe everything in clear detail maybe we can help, but as it stands that is impossible.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to connect wires in ceiling fan and light with dual wall switch? [ 5 Answers ]

How do I wire a ceiling fan and light? I have two wall switches. The fan wires consist of a black and red on one side and a black and red on the other side. Incoming wires are black, red, white, and ground. I hooked up the black to the black and red to red on one side and then white to red and...

Ceiling box has six wires. Need to connect to three wire ceiling light. [ 6 Answers ]

Replacing the ceiling fan/light with a ceiling light. The ceiling box has two sets of wires. One set has a yellow wire, white wire and black wire. The second set has a green wire, white wire and black wire. The ceiling fixture I am trying to attach has only three wires. Which wires do I attach?...

Trying to wire ceiling fan switch and 2-3way light switches for ceiling lht/fan combo [ 5 Answers ]

I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....

Connect ceiling fan wires to ZE268S6 pull chain switch [ 2 Answers ]

I ordered a new pull chain switch from Hunter and I want to install it myself. It's configured a bit differently than the original. The switch has 4 slots on the side like the original (Well Tec) and also 4 small round holes on the top. Can someone tell me where and how to connect the fan...

How do I connect the wires on a new pull chain switch on a ceiling fan? [ 1 Answers ]

I have a Heritage Model H42UL (05 2001) ceiling fan that had the fan switch removed before I acquired the fan. Wire colors for the switch are Black, Orange, & from the capacitor, Yellow & Purple. Which wire goes to which slot on a new switch?

View more questions Search