Pilot won't stay on

Crummy1018 Posts: 3, Reputation: 1

New Member

Sep 25, 2012, 09:14 AM

Pilot won't stay on

I have a 2002intertherm propane furnace when I turn it on the pilot comes on for a couple seconds then goes out I can't find a flame senser

Check out some similar questions!

Furnace light up and stay lite for 3 min, pilot want stay lite, change thermalcouple [ 0 Answers ]

My furnace pilot would not stay lite, changed the thermcouple but pilot would still not stay lite, i installed a new gas valve, now pilot will stay lite until the unit lites up the furnace unit will come on and pilot goes out and unit stays on for about 3 min and then i hear a click and the furnace...

Furnace won't stay lit.pilot light is on but burners will ignite but don't stay lit [ 1 Answers ]

Pilot light will not stay on [ 11 Answers ]

I have a very old Commonwealth Co. 16,800 BTU wall heater. I can light the pilot while holding the red knob (pilot light position), but the pilot will go out as soon as I release it (after holding it over the required time) and try to move it to the on position. Does this have something to do with...

Pilot doesn't stay on [ 1 Answers ]

Heil furnace, new thermostat, new thermal copper, pilot ignites, blower comes on, fan comes, one once unit hit temp, when blower turns off pilot turns completely off, what needs to be done to correct:confused:

Pilot won't stay on [ 3 Answers ]

I have a snyder-general furnace and my pilot won't stay on after you turn it from pilot to on I tried evrything... is it the thermocouple or does this furnace have a sensor... and if so how do I change it out... furnace was manufacture in 91...

View more questions Search

Check out some similar questions!

Add your answer here.